木工机械专用脉冲阵打除尘器采用惯性分离与过滤除尘相结合的工作原理，能有效处理高浓度的混合粉尘气流可有效分离5um以下的细微粉粒，是传统旋风除尘器的理想替代产品。适用于各种木器厂家具厂木地板厂等的实木创花人造板颗粒,木质纤维的集尘除尘,木工除尘设备布袋除尘器是在汲取国内外同类产品先进技术经改进后设计而成的布袋除尘器。木工除尘器除尘设备采用高压(0.5-0.7MPa)大流量脉冲阀逐条滤袋喷吹清灰的先进技术，正压式风机布置，吸尘压力大，设备阻力小与国内外其它布袋除尘器相比，具有清灰动能大，清灰效率高的特点。

　　The pulse array dust collector for woodworking machinery adopts the working principle of combining inertial separation and filtering dust removal, which can effectively handle high concentration mixed dust airflow and separate fine particles below 5um. It is an ideal substitute for traditional cyclone dust collectors. Suitable for various woodworking factories, furniture factories, wooden flooring factories, etc., solid wood flower artificial board particles, wood fiber dust collection and removal, woodworking dust removal equipment bag filter is a bag filter designed after absorbing advanced technology from similar products at home and abroad and being improved. The woodworking dust collector adopts advanced technology of high-pressure (0.5-0.7MPa) high flow pulse valve to spray and clean the dust filter bag one by one. The positive pressure fan is arranged, with high suction pressure and low equipment resistance. Compared with other bag dust collectors at home and abroad, it has the characteristics of high cleaning energy and high cleaning efficiency 

　　、木工机械专用除尘器应用范围:适用于四面刨、砂光机、锯切机、剖片机、棒磨机等各种木工机械设备，采用单机除尘或系统除尘的方法均可。单机除尘主要用于单台木工机械除尘，具有灵活方便的特点。系统除尘用于木工机械生产线的除尘，具有经济、实用、美观等特点，既不影响生产操作，又可达到理想的除尘效果。布袋除尘器是目前使用除尘效率****的除尘器，除尘效果能达到99%。适用于实木刨花,人造板颗粒,纤维的集尘,气箱脉冲袋式除尘器采用过滤的方法将含尘气体中的粉尘颗粒阻留在布袋纤维织物上，从而使气体得到净化。适宜捕集非粘结性、非纤维粉尘，与一般除尘器相比，除尘效率可稳定在99%以上，能除去1微米左右的颗粒。该除尘器具有结构简单，投资费用低，操作简单可靠管理维护技术上要求不高等优点。

　　Application scope of specialized dust collectors for woodworking machinery: Suitable for various woodworking machinery equipment such as four sided planers, sanding machines, sawing machines, slicing machines, rod mills, etc., both single machine and system dust removal methods can be used. Single machine dust removal is mainly used for single woodworking machinery dust removal, with the characteristics of flexibility and convenience. System dust removal is used for dust removal in woodworking machinery production lines, which has the characteristics of economy, practicality, and aesthetics. It does not affect production operations and can achieve ideal dust removal effects. The bag filter is currently the most efficient dust collector in use, with a dust removal efficiency of up to 99%. Suitable for collecting dust from solid wood shavings, artificial board particles, and fibers. The pulse bag filter in the air box uses a filtering method to retain dust particles in the dusty gas on the cloth bag fiber fabric, thereby purifying the gas. Suitable for capturing non cohesive and non fiber dust, compared with general dust collectors, the dust removal efficiency can be stable at over 99%, and particles of about 1 micron can be removed. This dust collector has the advantages of simple structure, low investment cost, simple and reliable operation, and low technical requirements for management and maintenance.

　　、该种除尘设备具有阻力小，除尘效率高，处理风量大，性能稳定，占地面积小结构简单，实用廉价等特点。含尘气体由灰斗上部进风口进入后，在挡风板的作用下，气流向****动，流速降低，部分大颗粒粉尘由于惯性力的作用被分离出来落入灰斗。含尘气体进入中箱体经滤袋的过滤净化，粉尘被阻留在滤袋的外表面，净化后的气体经滤袋口进入上箱体，由出风口排出。

　　This type of dust removal equipment has the characteristics of low resistance, high dust removal efficiency, large processing air volume, stable performance, small footprint, simple structure, practicality and low cost. After entering through the upper air inlet of the ash hopper, the dusty gas flows towards * * * * under the action of the wind deflector, and the flow velocity decreases. Some large particles of dust are separated and fall into the ash hopper due to the inertia force. The dusty gas enters the middle box and is filtered and purified by the filter bag. The dust is trapped on the outer surface of the filter bag, and the purified gas enters the upper box through the filter bag opening and is discharged through the air outlet.

　　木工中央除尘设备参数主要包括以下核心指标，结合权威性和时效性信息整理如下：

　　The parameters of the central dust removal equipment for woodworking mainly include the following core indicators, which are compiled based on authoritative and timely information as follows:

　　一、基本性能参数

　　1、 Basic Performance Parameter 

　　阻力损失

　　Resistance loss

　　进出口全压差为1200Pa~5000Pa，数值越小能耗越低1。

　　The total pressure difference between import and export is 1200Pa~5000Pa, and the smaller the value, the lower the energy consumption.

　　出口含尘浓度 

　　Export dust concentration 

　　标准要求≤5mg/m?，满足环保及用户需求。

　　The standard requirement is ≤ 5mg/m ?, which meets environmental protection and user needs.

　　使用温度 

　　Operating temperature 

　　最高可达280℃，需确保气体温度高于露点。

　　The maximum temperature can reach 280 ℃, and it is necessary to ensure that the gas temperature is 1 above the dew point.

　　风机功率 

　　Fan power 

　　通常为3KW~22KW，采用变频器控制以优化效率。

　　Usually 3KW~22KW, using frequency converter control to optimize efficiency.

　　二、关键设计参数

　　2、 Key Design Parameter 

　　过滤速度 

　　Filtering speed 1

　　1.2~2.6m/min，平衡过滤效果与滤料寿命1。

　　1.2~2.6m/min， Balancing filtration efficiency and filter material lifespan.

　　过滤面积 

　　Filter area 

　　93~4361m?，根据处理风量和速度选择。

　　93~4361m?， Select 1 based on the processing air volume and speed.

　　风速控制

　　Wind speed control

　　吸入口风速：28~30m/s（确保粉尘吸附） 

　　Inhalation inlet wind speed: 28~30m/s (ensuring dust adsorption) 

　　管道风速：≥30m/s（防止积灰），最低14m/s（保证吸力）。

　　Pipeline wind speed: ≥ 30m/s (to prevent dust accumulation), minimum 14m/s (to ensure suction) 

　　三、系统组成与技术特点

　　3、 System composition and technical characteristics

　　主机与风道 

　　Host and air duct 

　　主机采用4-72型离心风机，风道设计逐级收缩（如主风筒φ800mm，支风管φ200mm）。

　　The host adopts a 4-72 centrifugal fan, and the air duct design gradually shrinks (such as the main air duct with a diameter of 800mm and the branch air duct with a diameter of 200mm).

　　过滤技术

　　Filtering technology

　　初效分离：旋风除尘（处理大颗粒）

　　Initial separation: Cyclone dust removal (for processing large particles)

　　深度过滤：布袋脉冲除尘（处理微细颗粒，除尘效率≥99%）。

　　Deep filtration: Bag pulse dust removal (processing fine particles, dust removal efficiency ≥ 99%).

　　智能化控制

　　Intelligent control

　　配备变频器、电控箱及火情监测系统，实现自动调节与安全防护。

　　Equipped with frequency converters, electrical control boxes, and fire monitoring systems to achieve automatic adjustment and safety protection.

　　四、其他参数

　　4、 Other parameters

　　处理风量 ：总风量可达110000m?/h（如110KW全负荷运行）。

　　Processing air volume: The total air volume can reach 110000m ?/h (such as 110KW full load operation).

　　维护便捷性 ：管道底部设置透明检修口，方便清洁。

　　Convenience of maintenance: Transparent inspection ports are installed at the bottom of the pipeline for easy cleaning.

　　以上参数综合了设备性能、设计要点及技术优势，适用于木工、家具加工等粉尘治理场景。

　　The above parameters integrate equipment performance, design points, and technical advantages, and are suitable for dust control scenarios such as woodworking and furniture processing.

　　本文由 中央除尘设备  友情奉献.更多有关的知识请点击  //www.cdzjbccc.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from the Central Dust Removal Equipment For more related knowledge, please click //www.cdzjbccc.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.